NEW CONSOLE POWER SUPPLIES BY GRS !
GMPS-15 POWER SUPPLY UNIT
(Replaces AMEK MPS-15 Power Supply)
For larger AMEK Consoles
Mozart, Einstein, Hendrix, 9098i, Media 51, etc.)
Power Supply Power Output, as standard (may be modified upon request)
+17.5 Volts DC at 15 Amps (console audio positive rails)
-17.5 Volts DC at 15 Amps (console audio negative rails)
+5 Volts DC at 20 Amps (console logic power rail)
+48 Volts DC at 1 Amp (console phantom power)
Power Supply Input Voltage (from wall plug)
Input voltage is internally set to:
120 Volts AC, 50/60 Hertz at 15 Amps
Changeable in field to:
220-240 Volts AC by changing 2 wires on the Power Transformers
Click for a larger image
Includes a sturdy 19" RFI/EMI shielded Steel & Aluminum Rack Chassis with black anodized front panel & Laser engraved legends.
Front panel illuminated power switch with 4 'hi-current rated' fuse holders & LED indicators for input and output protection indication
120mm cooling fan with low acoustic noise level
(34 dB) and removable internal air filter for easy cleaning
Two optional cooling fans may be fitted on the rear panel for high ambient temperature installations
Voltage and Current sensing is included on the +/-17.5 Volt Rails, on the +5 Volt Logic Rail & the +48 Volt Phantom Rail.
All output rails are fully output protected from Short Circuits, Over-Voltage, Over-Current and Thermal Overload.
raill is equipped wit a Soft-Startup circuit to protect the PSU & your
console from high in-rush current power surges.
top panel is fully ventilated (not shown in picture above) with machined
ventilation slots over the entire surface, providing cool operation!
cabinet tops are as shown in the picture below, from one of our smaller
power supply systems...
(photo above shows our newer chassis cabinet design. This picture is of one of our smaller power supply units)
All electrical components are UL/CSA Listed, including cable, connectors, PSU modules, switches, fans, fuse holders and terminal blocks.
All internal connections are arranged for ease of repair orreplacement 'in field', should the need arise.
All GRS Power Supplies carry a full 5 Year,Parts & Labor Warranty (shipping not included).
Custom, high current power transformers for each
individual power rail.
Various power output connections are available.
Shown above are Harting connectors & standard 'stud &
Available is a variety of output connectors to match your console application.
The internal power supply modules provide excellent output voltage regulation with very low AC ripple.